• 105-171 Commercial Drive, Kelowna BC, V1X 7W2
  • Monday-Friday 8:00am-5:00pm
  • Login/Register
  • 0



SKU: 1-M5PIDXWQMAD Category:


 GasAlertMicro 5 PID portable gas detector simultaneously monitors up to five atmospheric hazards including volatile organic compounds (VOCs), oxygen, combustible gas (% LEL) and a wide selection of toxic gases. Compact and lightweight, GasAlertMicro 5 PID activates audible, visual and vibrating alarms in the event of a low, high, TWA or STEL alarm condition.

Features: Smaller and over 50% lighter than competitive instruments Water-resistant design in an integral concussion-proof enclosure Continuous LCD shows simultaneous gas concentrations for five gases 0 – 1000 ppm measurement of VOCs (Volatile Organic Compounds) Integral motorized pump option for remote sampling Two power options: AA alkaline or rechargeable hot-swappable battery pack Provides 95 dB alarm tone and two bright wide-angled alarm bars Equipped with internal vibrating alarm for high noise areas Three backlight options: standard- activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only- activates in alarm conditions and reactivates on-demand; stealth mode Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxic gases Simple automatic calibration procedure Records TWA, STEL, and maximum exposures to gas and displays readings on command User selectable field options include: PID correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms

Specifications: Auto zero: Yes Sensor: PID (VOC) 10.6 eV lamp; plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL) ALARM LEVELS: Instantaneous Low Alarm for all gases; Instantaneous High Alarm for all gases; LCD: Continuous, alphanumeric gas readout and status display advises: Peak (MAX)/STEL/TWA: Records exposures and displays on demand Alarm setpoints: Displayed on activation and on demand Calibration due date: Days remaining displayed on start-up Clock: Real-time clock setting displayed on start-up Test: Full function self-test: Sensor integrity, circuitry, battery and audible/visual alarms on activation Tests: Battery: Continuous Operating temperature: 14 to 104oF / -10 to 40oC VOC (PID); -4 to 104oF / -20 to 40oC NH3; Battery Options: 12 hours on three AA alkaline cells or 10 hours on rechargeable “hot-swappable” battery pack when equipped with PID, oxygen, combustible and TwinTox (H2S/CO) sensors WARRANTY: Full 2-year warranty including sensors (1 year PID lamp and NH3 sensor) DATALOGGER OPTIONS: User-downloadable datalogger.

This units configuration: O2, LEL, PID, CO, Alkaline, Diffusion, Non-datalogging.